Dynasolve 185

Dynasolve 185 is a solvent for deflashing, depotting, deinking, and other epoxy removal. It contains a proprietary blend of ingredients that facilitate polymer removal and prevent the depositing of particles back onto a part.

GENERAL:
Dynasolve 185 was developed so that a non-hazardous (by U.S. Department of Transportation definition) product was available for removing amine-cured epoxies. It is very effective, biodegradable, and has a versatility that allows it to be used in several applications as seen below. Dynasolve 185 does not contain phenol, chlorinated solvents, or strong acids and bases. Dynasolve 185 will not attack most metals used in electronic components including aluminum.

APPLICATIONS:
1. Dynasolve 185 is excellent for chemical deflashing of most plastics including Epoxy B-type materials.

2. It will disintegrate many epoxy-molded devices including UV-cured and amine-cured epoxies.

3. This solvent will remove many cured inks.

4. It is an effective solvent for removing molded epoxy residue from molds.

5. It is effective at softening and detackifying acrylic emulsions and other laminating or pressure-sensitive adhesives.

SPECIFICATIONS:

Physical Form	Clear to Light Amber Liquid
Specific Gravity	1.04
Boiling Point	369oF
Flash Point	199oF (cc)

DIRECTIONS FOR USE:

DEFLASHING:  Heat Dynasolve 185 to 250-300oF under a vented hood. Immerse component for 15-30 minutes. Rinse with water; blow off any remaining flash with an air gun. May be run at 175-210oF for a longer length of time.

DEPOTTING/ DEINKING:  Immerse the component in Dynasolve 185, cover with a watch glass, and heat to 200oF under a vented hood. After depotting, allow the solution to cool, remove the device with metal tongs, and rinse with alcohol and water. If the epoxy does not disintegrate within one hour, raise the temperature to the boiling point and continue to heat. If there is no effect after 4 hours, discontinue heating, as the device is molded from Epoxy B or a polymer resistant to Dynasolve 185. For deinking, if Dynasolve 185 is not completely satisfactory, try Dynasolve 711 or 750. It may be necessary to suspend the component in solution so that the material removed will settle to the bottom of the container and not redeposit onto the component.

 

CAUTION AND WARNINGS:

Dynasolve 185 contains powerful organic solvents. It is harmful if inhaled or swallowed. Avoid breathing vapors or mist. Keep away from heat and flame. Avoid contact with eyes and skin. Wear gloves, safety glasses, and protective clothing when handling. Use with adequate ventilation. Refer to MSDS before use, for disposal, or additional safe handling.

AVAILABILITY AND TERMS:
Dynasolve 185 is packed in US pints, quarts, 9 pint bottles, 5-gallon pails and 55-gallon drums.  It is a stock item and can be shipped by UPS (ground or air), truck or air freight.  Terms are Net 30 days, FOB Indianapolis.  Prices subject to change without notice.

For additional information on our products and services, just click on any links or categories, or call, fax or E-mail us. We look forward to working with you.

Dynaloy, Inc. takes every precaution in the manufacture of its products. The information in this sheet is based upon our own research and is considered accurate. However, no warranty is expressed or implied regarding accuracy and results to be obtained, since operating conditions in your plant are beyond our control.